Differential RX
Model 1000
OEM Recommended Service
- Replaces differential and gear box fluids in 5 minutes
- Clear hoses allow visual confirmation on fluid exchange process.
- All hoses fuel and oil rated (wire woven core)
- 5-gallon waste fluid container
- Fluid rack holds 1 gallon or 2 each 2 pint (64 oz) containers
- Two high capacity flowjet pump with pressure control for each pump
- Sturdy roll around cart
- Provide vital OEM recommended service to your customers
Differential RX
Model 1000
The Benefits of Differential Rx
This service replaces contaminated and depleted differential/ gear box fluids with new clean fluids. Differential fluid works to cool, clean and lubricate the gears and bearings. With milage friction wears out differential fluid and additives. Additionally, small abrasive metal particles may be worn off the gears and mix with differential fluid. Water can also contaminate the oil. Adding fresh differential fluid maintains smooth gear and bearing operation, protects against rust and corrosion, and extends the life of internal parts.
How It Works
This service removes and replaces differential fluid and fluid in manual transmissions. To begin the service, all valves and switches are turned off. The “New Fluid” reservoir is filled with differential fluid. The hose with the flexible extension is inserted into the bottom of the differential after removing the differential full plug. The differential fluid must be up to operating temperature or 1000 F degrees at a minimum.
Both pressure regulators are adjusted to 15-40 psi. The used fluid pump is turned on to extract the old fluid. A desired amount of differential fluid is poured into the “New Fluid” pump. The “New Fluid” valve is inserted into the differential opening. The handle is pressed and the differential is filled to the proper level. At the completion of the service, the differential plug is reinstalled.
Recommended Service Interval
Differential and gear-box fluid should be changed at specific mileage intervals as recommended by your manufacturer. This ranges from 12,000 miles to 40,000 miles depending on vehicle manufacturer.
Technical Specifications
Shop Air: 80-90 psi
Air Pumps: Flowjet
Hoses: 2 high capacity hoses Fuel and Oil rated
New Fluid Capacity: 1 gallon or 2 each 2 pint (64 oz.) containers.
Waste Fluid Tank: 5 gallons
Oil Filter: Optional 5-micron strainer for used oil
Dimensions - 24" x 20" x 32" (61 x 51 x 81 cm.)
Weight - 70 lbs. (32 Kg).
Cabinet - Power Coated Metal
Cleaning Cycle: From 5 to 10 minutes depending on service and. vehicle type
Warranty: 2 year limited warranty
Get In Touch