Oil RX • Model 3000

---

The 15 -minute service for gasoline engines starts by connecting the Oil Rx Machine to shop air. Vehicle specific adapters are then connected to the engine’s oil filter port. The engine is then started. While the engine is idling, a mixture of cleaning solution and motor oil is circulated through the engine’s entire lubricating system. This includes valve covers, valve train, hydraulic lifters, gear train, oil pump, oil pickup screen, oil galleys, crankcase, side-walls, and all oil-wetted surfaces. For passenger vehicles (petrol) one US Quart of EFX -601 cleaning solution mixes with engine oil and circulates through the machine’s filter about 4 to 5 times per minute.

The EFX-601 solution dissolves sludge and other contaminants. Heavier contaminants—wear metals and gasket particles—are flushed into the oil pan. The dissolved contaminants are removed from the engine by the 5-micron filter that is part of the cleaning system. The 5-micron filter is replaced after each service is performed. The engine oil is drained at the completion of the cleaning cycle. The service includes an air flush of the oil system which forces left over motor oil and cleaning solution out the oil drain plug opening. A timer sounds when the service is complete.

Depending on engine size, design, and level of contamination (mileage), approximately 4 ounces of EFX – 601 solution is used per engine cylinder during the cleaning process. EFX –601 is a powerful fuel detergent that is safe for all automotive applications. It has no adverse effect on engine seals or gaskets. Leaving a small amount of EFX-601 in the engine is actually beneficial as it contains a seal rejuvenator and oil conditioner. MSDS sheets are enclosed with shipping documents and may be obtained on request.